23 فبراير 2014

How to update ANDROID Kitkat 4.4.2 CM 11 on Samsung galaxy tab GT-P1000/ GT-P1000/L/N SGH-T849 GSM | SCH-I800/SPH-P100 CDMA VZW/SPRINT

How to update ANDROID Kitkat 4.4.2 CM 11 on Samsung galaxy tab GT-P1000/ GT-P1000/L/N SGH-T849 GSM | SCH-I800/SPH-P100 CDMA VZW/SPRINT

2/23/2014













how to install:
  • Back up.
  • P1/L/N flashers: if you haven't backed up your /efs folder, restock to GB-v5, root your tab and back up the /efs folder.
  • Preferably start from a clean state by restocking to GB-v5 for P1/L/N, EI04 for SCH-I800 or EF17 for SPH-P100.
  • If you're coming from a ROM before CM-10 or equivalent, especially if coming from a non-MTD based ROM, flash CM-10.x first.
  • Verify the integrity of the cm-11-YYYYMMDD-terenceng-p1*.zip and and other zip files before you proceed.
    You can let CwM or TWRP verify for you before it flashes by also copying the corresponding .md5 files
    if available to the same location (root of internal or external sdcard).
  • If the current ROM on your tab does not have CwM or TWRP recovery, boot into DOWNLOAD mode and flash a suitable kernel:
    heimdall flash --KERNEL kernel_filename
    You may obtain a suitable (and the correct) kernel from the Downloads section or from another ROM.
  • Boot into CwM or TWRP recovery.
  • Wipe cache, dalvik cache and data.
  • Wipe or format system.
  • Flash cm-11-YYYYMMDD-terenceng-p1*.zip.
  • If you're switching from Normal build to NoInternalSD build, or vice-versa, reboot into TWRP Recovery, wipe cache, dalvik-cache and data again.
  • Reboot.
  • Allow tab up to 20 minutes (usually takes much less time) to reboot to the initial Setup screen.
  • Complete the initial setup (CM Account setup is optional).
  • Go to Settings, and enable Developer Options, allow installation from Unknown Sources,
    enable Android Debugging, enable Advanced Reboot, etc.
  • P1/L/N flashers: if necessary, restore /efs and/or replace /radio/modem.bin with your local modem.bin, and reboot.
  • Restore any other backup(s) (eg. /data) that you have previously saved, if you want to.
  • If you want to convert to ART, do so now.
  • If you haven't done so, install the correct version of BaNkS Core GApps package . You can install some other larger BaNkS GApps package (eg. Standard package) but, because this ROM is larger than other ROMs, for some removable stuff (eg. some removable system apps, wallpapers, ring tones, etc), either you remove them directly or from the cm-11-YYYYMMDD-terenceng-p1.zip file before you flash or you move and install them as user apps, so that the larger GApps package will fit into the limited /system space. Other GApps packages like PA GApps, etc will most likely not fit in. Remember to install GApps after the ROM install and reboot steps. If you don't follow this instruction, you may get weird results like "installed stuff not appearing".

What news:
  • Some new features in Android 4.4
    • Chromium WebView
    • Tools for analyzing memory use (adb shell dumpsys procstats)
    • Screen recording (adb shell screenrecord) (not working yet)
    • Full screen immersive mode
  • Latest commits from Google AOSP 4.4, CyanogenMod's and SGT7's repos
  • SELinux enabled (Enforcing or Permissive settable mode)
  • TWRP touch-UI recovery with support for encryption, compression,
    time and battery display
  • Root
  • Compatible with both Dalvik and ART
  • Faster and slickier than CM-10.2
  • Over-clocking to 1.4GHz
  • 6 CPU governors
  • Trebuchet launcher
  • SGT7 features (more to come)
  • Tablet UI features (more to come)
  • Screenshots
  • USB Host / USB OTG (need Y cable) (Testers needed)
  • USB Tethering
  • Service
  • Call
  • SMS/MMS
  • 2G
  • Data (3G/HSDPA)
  • WiFi
  • WiFi Tethering
  • Bluetooth
  • Bluetooth Tethering
  • Bluetooth support for HID Devices, Low Power Proximity and extended LE scan
  • GPS
  • Audio playback
  • Video playback with support for HD and HW acceleration
  • Camera
  • Include ROM variants for tabs with damaged internal sdcards (New!)


25 Jan 2014
  • Experimental build for P1000/L/Ns with damaged internal sdcards
  • Essentially the same as the normal 24 Jan 2014 build
    (since I compiling a NoInternalSDCard build, I might as well include the normal build)

12 Feb 2014 (P1C build)
  • Front camera fix with 1.3MP resolution
  • app2sd fix (untested)
  • Left-handed navigation bar in landscape mode (untested) (setup in Settings | Interface)
  • Add file uploading support in chromium-based web browsers (untested)

DOWNLOAD : 

ROM P1/N/L    cm-11-20140125-terenceng-p1.zip [MD5]
ROM P1C        cm-11-20140212-terenceng-p1c.zip [MD5]

 GAPPS:

 BaNkS/GApps

KERNEL :

 P1 Kernels :

P1L/P1N Kernels:
P1C Kernels:

هناك تعليق واحد:

  1. é isso ai24 فبراير 2014 في 4:32 م

    hey man
    I spoke with you the other day about the problem in my P1N loading boot screen and then shut down. I installed the samsung usb drive but the pc by odin/heimdall, still does not recognize the tab in download mode. what else can I do?

    ردحذف